Flexo Photopolymer Plate Making Machine
Share

Digital Flexo Plate 1.70mm

Digital Flexo Plate 1.70mm

The structure of Flexographic Printing Plate DR170L


Specification

1200mm × 2032mm

1067mm × 2032mm

1067mm × 1524mm

762 mm × 1016mm

Technical Specification

Type DR170L DR170H
Plate thickness (mm) 1.70 1.70
Laser Ablation Energy (J/cm2 ) 3.2-3.3 3.2-3.3
Durometer (Shore A) 62-60 73-72
Relief depth (mm) 0.7-0.9 0.7-0.9
Image reproduction 1-98% 1-98%
Maximum line (line/inch) 150 150
Minimm isolated line 0.10mm 0.10mm
Minimum isolated dot 0.20mm 0.20mm

Platemaking Data Recommended :

  • Back Exposure (sec): 25-35
  • Main Exposure (min): 15-20
  • Table Rinsing (min): 5-6
  • On-line Washer Rinsing (mm/min): 125
  • Drying (hrs): 1-2
  • Detackfying (min): 5-8
  • Post exposure (min): 5

Notice :
Calibration curve just similar to Flint Digital Flexo plate. The accurate data will be obtained in the next three month.

  • 1. All the above data is depended on the plate-making device in Huaguang.
  • 2. Due to the different requirements of plate-making device, UV lamp power, relief depth and print image, the above recommended time can be changed suitable.
  • 3. Customers should test on their own device for optimum plate quality

Services